October 17, 2026
SS 202 is a low-nickel, high-manganese stainless steel that costs less than SS 304. It suits indoor railings, furniture, fabrication and general structural work where extreme corrosion resistance is not required. If you buy from an SS 202 pipe manufacturer in Sonepat, you also get a short supply chain into Delhi NCR, which means faster dispatch and easier plant visits.
Steel Star, powered by Karauli Steel, manufactures steel pipes from its plant in the HSIIDC industrial estate at Kundli, Sonepat. This guide explains where SS 202 works, where it does not, and what to ask a manufacturer before you place an order.
SS 202 belongs to the 200 series of austenitic stainless steels. The 200 series replaces part of the expensive nickel with manganese and nitrogen. That is why it costs less than the 300 series.
Typical composition for SS 202:
For comparison, SS 304 carries about 18 to 20% chromium, 8 to 10.5% nickel and a maximum of 2% manganese. Nickel is the main driver of stainless steel cost, so the lower nickel in 202 is where the saving comes from.
SS 202 vs SS 201 vs SS 304
| Property | SS 201 | SS 202 | SS 304 |
|---|---|---|---|
| Chromium | 13.5 to 15% | 17 to 19% | 18 to 20% |
| Nickel | about 1 to 1.3% | 4 to 6% | 8 to 10.5% |
| Corrosion resistance | Lowest of the three | Moderate | Good |
| Cost | Lowest | Lower than 304 | Highest of the three |
| Best for | Dry, decorative indoor use | Indoor and mild-environment use | Food, humid and demanding settings |
SS 202 sits between the two. It has more chromium and nickel than 201, so it resists corrosion better, and it costs less than 304. Treat the figures above as typical ranges. Always confirm the exact grade limits on the mill test certificate.
SS 202 is a sensible choice when the pipe stays in a controlled, mostly dry environment:
Steel Star’s product range covers round, square, rectangle and oval pipes, which are the shapes fabricators and furniture makers use most.
Be honest about limits, because a wrong grade costs more than the money saved.
A good manufacturer will tell you this before you order, not after the complaint
Sonepat and Kundli form one of Haryana’s established industrial belts, right on the Delhi NCR corridor. For buyers, that brings real advantages:
If you are a dealer, builder or fabricator in NCR, sourcing from Kundli can cut both lead time and transport cost.
Use this checklist with any manufacturer, including us:
Buyers who skip the first step often discover the grade only when rust appears.
Steel Star, powered by Karauli Steel, manufactures steel tubes and pipes for construction, infrastructure, industrial and engineering use. The head office and plant are at 148, HSIIDC Phase-II, Industrial Estate, Kundli, Sector-53 Sersa, Sonepat, Haryana.
You can explore more before you enquire:
For market context on stainless steel pricing, see Indian Stainless Steel Development Association or similar industry source.
SS 202 pipe is used for indoor railings, furniture, decorative fabrication and light structural work. It suits dry or mildly humid environments where the cost saving over 304 matters more than top corrosion resistance.
Generally, yes, for corrosion resistance. SS 202 carries more chromium and nickel than SS 201, so it holds up better. SS 201 is cheaper but is best kept to dry, decorative indoor use.
Only with care. SS 202 can stain or rust in wet, coastal or polluted conditions because of its lower nickel content. For outdoor or marine use, choose SS 304 or SS 316.
Ask for a mill test certificate or a chemical analysis report that lists chromium, nickel and manganese content. Do not rely on appearance or a magnet test alone.
Steel Star’s plant is in the Kundli HSIIDC industrial estate. Call +91 93111-11154 or email krolisteel@gmail.com to arrange a visit.
Need SS 202 pipes for a project, a fabrication unit or resale? Share your size, thickness, finish and quantity, and we will respond with a quote. Call +91 93111-11154, email krolisteel@gmail.com, or send an enquiry.
